TIGER LASER 6010 XY

Two-in-one diameter measurement and surface inspection

The TIGER LASER 6010 XY is an innovative two-in-one measuring device. It measures the diameter and at the same time it inspects the surface of the product for lumps and neckdowns. Optionally, the TIGER LASER 6010 XY can be combined with a device of the ECOCONTROL series for displaying the faults. Due to the exact visualization the faults can be evaluated realistically. All images can also be saved on the ECOCONTROL.

The technology is based on 2 high-resolution image sensors. By means of these sensors the surface profile is inspected and faults are reliably detected. The high measuring rate guarantees the highest precision of the diameter measuring results.

Additional technical data of the TIGER LASER 6010 XY correspond with the devices of the LASER Series 6000.

 Specifications

	TIGER LASER 6010 XY
Product diameter	100 µm - 10 mm
Diameter accuracy*1)	± 0.5 µm
Min. fault length	0.1 mm
Min. fault height	± 0.5 µm
Line speed	up to 3,000 m/min
Measuring frequency	Diameter: 500 Hz Lump detection: 512 kHz
Interfaces	RS485, RS 232, LAN (Ethernet) Line speed input Optional: Anybus-module, Profibus, 2 digital contacts for lump and neck, Analog IN for tolerance specifications, analog OUT for diameter values 2 x 16bit
Power supply	100 ... 230 V AC ± 10%, 50/60 Hz

Outstanding features

• Diameter measurement and surface inspection
• Use of image sensors
• Graphical display and storage of the surface profile of detected lumps and neckdowns
• High fault detection probability