CV-INTUBE 6000 for nitrogen vulcanizing
CV-INTUBE 6000
The successor becomes
the precursor
In-tube diameter measurement at steam and nitrogen CV-lines
With the CV-INTUBE 6000 SIKORA presents a diameter measuring device, perfectly suited to the specific conditions at steam and nitrogen CV-lines. Directly integrated in the telescopic tube, after the cross head, the system provides reliable and precise diameter values for quality assurance and fast control. Typically the CV-INTUBE is used in high-speed insulating lines and for products that require a diameter measurement and control, but that do not need eccentricity measurement directly in the telescopic tube.CV-INTUBE 6000 includes a CV-gauge head and a sight glass assembly with an infrared light source integrated in the CV-tube. Due to this sophisticated technology only one sight glass is necessary.
The CV-INTUBE 6000 can easily be integrated into any steam and nitrogen CV-line and can be adapted to any system control via serial or analog interfaces.
The sight glass assembly is mounted approximately 200 mm after the extruder in the moving part of the splice box. Equipped with an automatically controlled sight glass heating and rinsing system the sight glass is kept free from contaminations.
Specifications
| CV-INTUBE Model | 6050 | 6075 | 6100 | 6120 |
| Sight field [mm] | 50 | 75 | 100 | 120 |
| Cable diameter [mm] | 0,5 to 40 (20 mil to 1.6") |
1 to 50 (40 mil to 2") |
1 to 80 (40 mil to 3.2") |
1 to 100 (40 mil to 3.9") |
| Measuring accuracy | ± 5 μm, + 0,01 % |
± 10 μm, + 0,01 % |
± 15 μm, + 0,01 % |
± 15 μm, + 0,01 % |
| Measuring rate [1/sek] | 250 | 250 | 250 | 250 |
| Interface | RS 485, RS232 diagnosis interface, Profibus-DP (option) | RS 485, RS232 diagnosis interface, Profibus-DP (option) | RS 485, RS232 diagnosis interface, Profibus-DP (option) | RS 485, RS232 diagnosis interface, Profibus-DP (option) |
| Analogue outputs | 0 to 10 V | 0 to 10 V | 0 to 10 V | 0 to 10 V |
Ambient temperature:
+5 to +50°C (40 to 120° F)
Power supply:
a) Gauge head: 100 to 240 Volt, 50 to 400 Hz
b) Sight glass assembly: 230 V AC, + 7 % / - 10 %, 50 to 60 Hz
Outstanding features
-
Measurement of the diameter directly after the cross head
-
Reliable control
-
Continuous operation of the sight glass for many months
- No calibration
