X-RAY 2000
Specifications
| Field of application | insulation and jacketing line |
| Insulating material | PVC, PE, HDPE measurement of other types of material on request |
| Insulation thickness | ≥ 0,3 – 5 mm measurement of thicker or smaller wall thickness on request |
| Calibration | the X-RAY 2000 requires no calibration |
| Sight field | 35 mm (recommended for cables with a diameter up to 30 mm) 70 mm (recommended for cables with a diameter up to 70 mm) 120 mm (recommended for cables with a diameter up to 100 mm) 200 mm (recommended for cables with a diameter up to 180 mm) 300 mm (recommended for cables with a diameter up to 270 mm) |
| Safety (radiation) | Radiation measurements by independent experts have revealed that the radiation in direct proximity of the device is far below limiting values of all international regulations. |
| Measuring accuracy | wall thickness/eccentricity better than ±20 μm |
| Interfaces | RS 485 + RS 232 diagnostic interface |
| Resolution | 10 μm |
| Power supply | 230 V AC ± 5 %, 50 – 60 Hz |
| Power consumption | 200 VA |
| Permissible temperature | +5 … +45 °C (+41 … +113 °F) |
| Dimensions | X-RAY 2035 955 mm x 1650 mm x 387 mm (w/h/d) X-RAY 2060 808 mm x 1172 mm x 385 mm (w/h/d) X-RAY 2120 1060 mm x 1230 mm x 335 mm (w/h/d) X-RAY 2200 1312 mm x 1372 mm x 386 mm (w/h/d) X-RAY 2300 1312 mm x 1372 mm x 386 mm (w/h/d) |
| Model | min. / max. cable diameter |
measuring accuracy* | sight field | opening of the measuring head |
| X-RAY 2035 | 5 to 30 mm | 5 µm | 35 mm | 100 mm |
| X-RAY 2060 | 6 to 70 mm | 10 µm | 70 mm | 100 mm |
| X-RAY 2120 | 10 to 100 mm | 10 µm | 120 mm | 180 mm |
| X-RAY 2200 | 20 to 180 mm | 20 µm | 200 mm | 350 mm |
| X-RAY 2300 | 30 to 270 mm | 30 µm | 300 mm | 400 mm |
