X-RAY 8000 NXT



Specifications


Specifications X-RAY 8000 NXT
Field of application CCV-, VCV-line operating with nitrogen and /or steam
Field of use medium, high and extra high voltage cable with XLPE, EPR, EPDM, HYPALON insulation etc.
Measuring range 100/160 mm XLPE-tubes, 45 mm EPR-cables*
Measuring accuracy

Wall thickness: ± 15µm, ± 0.02 %
Diameter: ± 5 µm, ± 0.02 %

Repeatability Wall thickness 7.5 µm, diameter 3 µm
Scan speed Up to 60 mm/s
Radiation Radiation measurements by independent experts have revealed that the radiation in direct proximity of the device is far below limiting values of all international regulations.
Permissible temperature +5 to +50°C
Cooling water consumption approx. 60l/h at t ≤ 28°C
Dimensions Approx. 560 x 560, 270 mm long
Specifications Processor/Monitor-System
Display TFT-color monitor
Display of measured values
  • Diameter, ovality, wall thickness, eccentricity
  • Graphical trend display of measured values on a time or length related diagram
  • Statistical distribution
  • SPC-Data, mean/max/min value, standard deviation, CP, CPK-calue
Operation Touchscreen
Control modes
  • Wall thickness of the insulation
  • Wall thickness of the outer semiconductor
  • Wall thickness of the inner semiconductor
  • Concentricity**
  • Outer diameter
  • Hot/Cold control HC 2000
Control interface Isolated in- and output, max ± 12 V, max ± 5mA
Serial interfaces** USB, NetDDE, OPC, Ethernet/IP, RS 485 ***
Contact outputs Contact outputs for tolerance or status messages (max. 30 V, max. 0.5 A)
Network/Modem interface Option
Data recording A hard disk stores the measured values in a time or length related interval
Power supply 230 V, 50 to 60 Hz
Power consumption 600 VA
Permissible temperature +5 to +45°C
Dimensions (cabinet) 19" cabinet, 600 x 610 x 2100 mm

* 70 kV scanners for EPR cable with big diameters
** Option
*** Signal outputs can be provided for the automatic centering of the crosshead

Technical data is subject to change